Window Milling Taper

Window milling taper is equipped with the deflector to complete window cutting in the casing.
The window milling taper is integrated with window cutting and window repair, which can complete window cutting and repair operations once to improve construction speed, thus meeting site construction requirements properly.

In terms of design, tool appearance, alloy cutting edge angle and selection all are subject to optimization design.

Technical Parameters of Window Milling Taper

Applicable Casing
Product Specifications

Maximum OD
(mm)


Tool Length
(mm)


Thread Type
(female )

5"(ф127)
KCXZ104
ф104
980
NC26
5½"(ф139.7)
KCXZ118
ф118
1080
NC31
KCXZ120
ф120
1080
NC31
6⅝"(ф168.28)
KCXZ144
ф144
1150
NC38
KCXZ150
ф150
1150
NC38
7"(ф177.8)
KCXZ152
ф152
1150
NC38
7⅝"(ф193.68)
KCXZ165
ф165
1200
NC38
9⅝"(ф244.48)
KCXZ215
ф215
1600
NC50
13⅝"(ф339.7)
KCXZ310
ф310
2000
NC50


评论

发表评论

此博客中的热门博文

Koomey Unit (BOP Control System)

图片
Koomey unit ( BOP control system ) for surface BOP stacks is very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. The hydraulic control system manufactured by SCOTON can be divided into 3 types: Directly manually operated FK series hydraulic control system The hydraulic control system not fitted with a driller's console is applicable to drilling or workover operations and is simple and portable. The hydraulic control system can be fitted with a mechanical anti-lifting device (see the operation manual for the anti-lifting device). Pneumatic liquid type FKQ hydraulic control system This hydraulic control system is fitted with a driller's console or an auxiliary driller's console (optional). Alarm type and non-alarm type driller's console and auxiliary driller's console can be installe...
阅读全文

Top drive Floating Cushion Sub

图片
Top drive floating cushion sub an important tool in drilling operation. It is suit to the drilling process in oil, gas and geological exploration. Mainly used for top drive drilling operation. It can increase the working life of bearing and gear in top drive rotary box. Specification of Top drive Floating Cushion Sub OD mm(inch) Upper Conn. Lower Conn. Lifting Force(T) Torque (KN • m) Stroke Mm(inch) OAL mm(inch) DQFC381(15) 6 5/8REG NC50 150 50 76(3) 798(30 13/32)
阅读全文

Wireline BOP

图片
The wireline BOP is used for sealing the wellhead to prevent well blowout accidents is logging operation when there are accidents and there are cables in the well. The  wireline BOP has simple structure, convenient application and maintenance, small volume, light weight, high pressure bearing, hydraulic remote control and simple and reliable operation. The BOP is mainly composed of main casing, and ram assembly piston, hydraulic cylinder, lead screw, end cap, hand wheel and other spare parts, which are moving in the main casing in opposite direction. When the well needs to be sealed, the hydraulic control and grease injection pressure control system is pressurized to push the piston, thereby leading the two ram bodies to move towards the center of the well bore, and well sealing can be achieved through the associative action of the front rubber sealing element and the top sealing rubber. The ram can be locked on the shut-in position through clockwise rotating the locking hand...
阅读全文