Integral Construction Hydraulic Pressure Whipstock

Many oil fields in domestic and foreign has reached the mid-final exploitation stage.The old well recovery and the accident well processing gradually increased.Window sidetracking technology has been widely used as the main method to solve the problem.
The conventional whipstock window cutting need decline whipstock and window cutting two steps, operation complex and cost expensive.The integral construction hydraulic pressure whipstock can complete two steps at one time, greatly shorten the construction period, save the construction cost.

The integral construction hydraulic pressure whipstock has simple operation, sealing strong,short window cutting advantages etc . 

The integral construction hydraulic pressure whipstock have two parts: whipstock and window cutting milling taper.

  • Whipstock

Whipstock adopts hydraulic seat sealing way, strong seat sealing, easy operation. The slant face is cambered surface use hardening treatment, when window cutting, the milling taper highly coincides with the slant face, drilling pressure can be controlled easily, decreased choke off drilling and bit bouncing. Internal adopts special pressure transmission structure, safe and reliable.Tool internal self-locking mechanism will be improved, using the axial and circumferential all-around self-locking, greatly improve the reliability of the tool.


  • Window Cutting Milling Taper

In casing, whipstock and window cutting milling cone matched to finish window cutting work. whipstock and window cutting milling taper with optimized design of tool shape, cutting edge Angle, selection of alloy block, make window cutting and maintenance integrally, improve the construction speed, shorten the construction period.

Basic parameters and performance index


applied 
pipe		WhipstockWindow Cutting Milling ConeAdapted 
deviation		Adapted 
temperature		Sealing 
type
Outline     
dimensions		Bevel 
angle		Bevel
length		Arc-like 
diameter		Outline 
dimensions		Buckle typeclipping 
pressure
51/2＂ (φ139.7)φ116x34643.2°1900φ125φ116x540211x23040KN≤40°≤200℃Direct pressure sealing
7＂ (φ177.8)φ150x39603.2°2515φ165φ150x630311x33060KN
95/8＂ (φ244.4)φ210x48504°2650φ225φ210x710411x43080KN


评论

发表评论

此博客中的热门博文

Koomey Unit (BOP Control System)

图片
Koomey unit ( BOP control system ) for surface BOP stacks is very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. The hydraulic control system manufactured by SCOTON can be divided into 3 types: Directly manually operated FK series hydraulic control system The hydraulic control system not fitted with a driller's console is applicable to drilling or workover operations and is simple and portable. The hydraulic control system can be fitted with a mechanical anti-lifting device (see the operation manual for the anti-lifting device). Pneumatic liquid type FKQ hydraulic control system This hydraulic control system is fitted with a driller's console or an auxiliary driller's console (optional). Alarm type and non-alarm type driller's console and auxiliary driller's console can be installe
阅读全文

Top drive Floating Cushion Sub

图片
Top drive floating cushion sub an important tool in drilling operation. It is suit to the drilling process in oil, gas and geological exploration. Mainly used for top drive drilling operation. It can increase the working life of bearing and gear in top drive rotary box. Specification of Top drive Floating Cushion Sub OD mm(inch) Upper Conn. Lower Conn. Lifting Force(T) Torque (KN • m) Stroke Mm(inch) OAL mm(inch) DQFC381(15) 6 5/8REG NC50 150 50 76(3) 798(30 13/32)
阅读全文

Wireline BOP

图片
The wireline BOP is used for sealing the wellhead to prevent well blowout accidents is logging operation when there are accidents and there are cables in the well. The  wireline BOP has simple structure, convenient application and maintenance, small volume, light weight, high pressure bearing, hydraulic remote control and simple and reliable operation. The BOP is mainly composed of main casing, and ram assembly piston, hydraulic cylinder, lead screw, end cap, hand wheel and other spare parts, which are moving in the main casing in opposite direction. When the well needs to be sealed, the hydraulic control and grease injection pressure control system is pressurized to push the piston, thereby leading the two ram bodies to move towards the center of the well bore, and well sealing can be achieved through the associative action of the front rubber sealing element and the top sealing rubber. The ram can be locked on the shut-in position through clockwise rotating the locking hand wheel. W
阅读全文