Deflector

Our deflecting tools have two types: anchor type deflector and hydraulic setting slip type deflector. hydraulic setting slip type deflector supply accurate orientation solid seat sealing advantages etc.
When reservoir area casing seriously damaged or reservoir sand buried or collapsed, the well can't production, in order to use the upper casing, reduce the cost of drilling, can make window cutting sidetracking on the upper casing above oil layer, to form a new hole for drilling.
Internal window sidetracking is a crucial method when drill a deviated well with seriously damaged bottom casing, to use the upper casing, make the well build up production capacity.
Window sidetracking tools mainly including deflector and window milling taper.

Basic Parameters and Performance Indicators

Product 
Specifi-
cation 
and 
Code
Applicable 
Casing                 
Structural 
Form                                 
Overall 
Dimension 
(mm)                        
Bevel 
Angle                  
Bevel 
Length 
(mm)                                 
Window 
Length 
(mm)                                   
Applicable 
Well 
Deviation                                
Applicable 
Well 
Temperature                            
Setting 
Method     
Connection
Thread                         
DXQ102
5"(ф127)
Common type
ф102×3210
3℃
1730
1600-1800
≤40°
≤200°
Hydraulic setting by ball injecting ★ or direct hydraulic setting
2⅞REG
DXQ102F
Leak protection type
ф102×3720
DXQ114
5½" (ф139.7)
Common type
ф114×3450
1900
1800-2000
NC31★or 2⅞REG
DXQ114F
Leak protection type
ф114×3960
DXQ142
6⅝"(ф168.28)
Common type
ф142×3940
2415
2000-2200
NC38★or 3½REG
DXQ142F
Leak protection type
ф142×4450
DXQ150
7"(ф177.8)
Common type
ф150×4000
2515
2400-2500
NC38★or 3½REG
DXQ150F
Leak protection type
ф150×4200
DXQ160
9⅝"(ф193.68)
Common type
ф160×4200
2700
2500-2700
NC38★or 3½REG
DXQ160F
Leak protection type
ф160×4400
DXQ210
9⅝"(ф244.5)
Common type
ф210×4600
4℃
2600
2700-3000
NC50★or 4½REG
DXQ210F
Leak protection type
ф210×4800
DXQ300
13⅜"(ф339.7)
Common type
ф300×5600
4030
3800-4300
NC50★or 4½REG
DXQ300F
Leak protection type
ф300×5800


评论

发表评论

此博客中的热门博文

Koomey Unit (BOP Control System)

图片
Koomey unit ( BOP control system ) for surface BOP stacks is very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. The hydraulic control system manufactured by SCOTON can be divided into 3 types: Directly manually operated FK series hydraulic control system The hydraulic control system not fitted with a driller's console is applicable to drilling or workover operations and is simple and portable. The hydraulic control system can be fitted with a mechanical anti-lifting device (see the operation manual for the anti-lifting device). Pneumatic liquid type FKQ hydraulic control system This hydraulic control system is fitted with a driller's console or an auxiliary driller's console (optional). Alarm type and non-alarm type driller's console and auxiliary driller's console can be installe...
阅读全文

Top drive Floating Cushion Sub

图片
Top drive floating cushion sub an important tool in drilling operation. It is suit to the drilling process in oil, gas and geological exploration. Mainly used for top drive drilling operation. It can increase the working life of bearing and gear in top drive rotary box. Specification of Top drive Floating Cushion Sub OD mm(inch) Upper Conn. Lower Conn. Lifting Force(T) Torque (KN • m) Stroke Mm(inch) OAL mm(inch) DQFC381(15) 6 5/8REG NC50 150 50 76(3) 798(30 13/32)
阅读全文

Wireline BOP

图片
The wireline BOP is used for sealing the wellhead to prevent well blowout accidents is logging operation when there are accidents and there are cables in the well. The  wireline BOP has simple structure, convenient application and maintenance, small volume, light weight, high pressure bearing, hydraulic remote control and simple and reliable operation. The BOP is mainly composed of main casing, and ram assembly piston, hydraulic cylinder, lead screw, end cap, hand wheel and other spare parts, which are moving in the main casing in opposite direction. When the well needs to be sealed, the hydraulic control and grease injection pressure control system is pressurized to push the piston, thereby leading the two ram bodies to move towards the center of the well bore, and well sealing can be achieved through the associative action of the front rubber sealing element and the top sealing rubber. The ram can be locked on the shut-in position through clockwise rotating the locking hand...
阅读全文