Elevator/Spider

Casing Elevator/Spider

The 350 and 500 Ton Casing Elevator/Spider Units are pneumatically operated power tools, capable of handing casing sizes from 4.1/2 to 24 1/2 inches, with string loads of 3150Kn for the 350 ton unit, 4500Kn for the 500 ton unit, 6672Kn for the 750 ton unit.

These units have been refined and incorporate such engineering features as air powered operation with safety latch, and four independent slips, as standard equipment.

The main bodies can be dressed as a casing elevator or spider. The elevator consists of an upper unit using a bell guide and bottom guide. The lower unit is dressed as a Spider with a top guide that centers the Spider over the master bushing.

The elevator is attached to the derrick traveling block and hook with 350 or 500 ton standard API links. The Spider locates directly on the pin drive master bushing (27.1/2 MSPC, 37.1/2 and 49.1/2 MPCH), and square drive master bushing (27.1/2 MSS), and will accommodate any other master bushing when used with an Adapter Plate of SCOTON.

Main Technical Parameters of Elevator/Spider

Spec item	American Units(in)			Metric (mm)
	500	350		500	350
style	14	14	20	14	14	20
Casing Size-range	4.1/2~14	4.1/2~14	16~20	114.3~355.6	114.3~355.6	406.4~508
Maximum Safe Hook Load	1,000,000 1bs	700,000 1bs		455,000kg	318,000kg
Normal Operating Pressure	70-80PSI			4.8-5.4atm
Maximum Pressure	125PSI			8.5atm

Main Technical Parameters of Elevator/Spider (Table 2)

Unit height	American Units(1bs)			Metric (kg)
	500	350		500	350
	4.1/2~14	4.1/2~14	16~20	4.1/2~14	4.1/2~14	16~20
Elevator with Bell Guide (Less Guide and Slip Assy)	4,265	3,600	4,850	1,941	1,634	2,200
Spider(Less Guide and Slip Assy)	4,065	3,400	4,410	1,850	1,543	2,000

Type DD Elevators

Model DD center latch elevator with square shoulder is suitable for handing drill collar,casing and tubing. The load ranges from 150 tons to 350 tons.The size ranges are from 2 to 5½.

Type DDZ Drill Pipe Elevators(18º TYPE ELEVATORS G SERIES)

DDZ series elevators are center latch elevator with 18 degree tape shoulder. applied on handing the drilling pipe and drilling tools, ect. The load ranges from 100 tons to 750 tons.The size ranges are from 2 3/8 to 6 5/8.

Type TA Elevator(COLLAR TYPE ELEVATORS A SERIES)

The TA Style Elevator are for use on tubing and drill collars. The elevators are balanced for easy handing with safety lock and latch and guarded operating handles. Sizes range from 35 ton to 150 ton and cover all size tubular up to 11 1/4".

Type SLX Elevator(SIDE DOOR TYPE ELEVATORS X SERIES)

Model SLX side door elevator with square shoulder is suitable for handing tubing, casing, drill pipe and drill collar in oil and natural gas drilling, well construction.

Y Series Slips Type Elevators

The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. it's especially suitable for the hoisting of integrated tubing sub, integral joint casing electric submersible column.

Type SJ Joint Elevator

SJ series auxiliary elevator is mainly used as a tool in handing single casing and tubing in oil and natural gas drilling and cementing operation.

Type SP Single Joint Elevators

SP series auxiliary elevator is mainly used as a tool in handing single tubing,casing and drill pipe with taper shoulder.

Type SRE Sucker Rod Elevators

Sucker Rod Elevators are hosing tools for handing suckers.they are unique with interchangeable heat treated steel plates for different size rods and ease of changing plates when worn to limit wear on elevator body.