Wireline BOP

The wireline BOP is used for sealing the wellhead to prevent well blowout accidents is logging operation when there are accidents and there are cables in the well. The wireline BOPhas simple structure, convenient application and maintenance, small volume, light weight, high pressure bearing, hydraulic remote control and simple and reliable operation. The BOP is mainly composed of main casing, and ram assembly piston, hydraulic cylinder, lead screw, end cap, hand wheel and other spare parts, which are moving in the main casing in opposite direction. When the well needs to be sealed, the hydraulic control and grease injection pressure control system is pressurized to push the piston, thereby leading the two ram bodies to move towards the center of the well bore, and well sealing can be achieved through the associative action of the front rubber sealing element and the top sealing rubber. The ram can be locked on the shut-in position through clockwise rotating the locking hand wheel. What be specially noticed is that before the well is opened, the locking hand wheel must be anticlockwise rotated, the hydraulic control system can be used for pressurizing after the hand wheel is totally receded to the initial position, the position is hydraulically pushed to led the two rams to rearwards move, and then, the well can be opened. It should be guaranteed to open the full i.d. to prevent the instruments and the ram from colliding when the well is opened.

Model               
ID
(mm)           
Working
 Pressure        
(Mpa)                           
Operation  
 Manner                          
Type
of
Ram                
Connection                        
 Manner
Working
 Environment 
Cable
 size                         
(mm)
SFZ5-21                    
52
21
Manual
Single
Ram      
3 1/2”-6SA
Crude oil, Water, Natural gas with H2S and CO2
1.8mm-3.2mm
SFZ6-35
62(65)                  
35
Manual
Single
 Ram
4 1/4”-6SA
2FZ6-35
62(65)
35
Hydraulic
Double
 Ram
4 1/4”-6SA
2FZ6-70
62(65)
70
Hydraulic
Double
 Ram
4 3/4”-4ACME
3FZ6-70
62(65)
70
Hydraulic
Triple
 Ram
4 3/4”-4ACME
SFZ7-35
76(78)
35
Manual
Single                
Ram
5”-4ACME or EUE 8rd
2FZ7-35
76(78)
70
Hydraulic
Double
 Ram
5”-5ACME
2FZ7-70
76(78)
70
Hydraulic
Triple
 Ram
5 3/4”-4ACME
3FZ7-70
76(78)
70
Hydraulic
Triple
 Ram
5 3/4”-4ACME
3FZ7-105
76(78)
105
Hydraulic
Triple
Ram
7”-5ACME
2FZ8-35
89
35
Hydraulic
Double
Ram
6”-4ACME
2FZ10-35
102(103)
35
Hydraulic
Double
 Ram
7”-5ACME
2FZ10-70
102(103)
70
Hydraulic
Double
 Ram
8 3/8”-4ACME
3FZ10-105
102(103)
105
Hydraulic
Triple
 Ram
9 1/2”-4ACME


评论

发表评论

此博客中的热门博文

Top drive Floating Cushion Sub

图片
Top drive floating cushion sub an important tool in drilling operation. It is suit to the drilling process in oil, gas and geological exploration. Mainly used for top drive drilling operation. It can increase the working life of bearing and gear in top drive rotary box. Specification of Top drive Floating Cushion Sub OD mm(inch) Upper Conn. Lower Conn. Lifting Force(T) Torque (KN • m) Stroke Mm(inch) OAL mm(inch) DQFC381(15) 6 5/8REG NC50 150 50 76(3) 798(30 13/32)
阅读全文

Koomey Unit (BOP Control System)

图片
Koomey unit ( BOP control system ) for surface BOP stacks is very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. The hydraulic control system manufactured by SCOTON can be divided into 3 types: Directly manually operated FK series hydraulic control system The hydraulic control system not fitted with a driller's console is applicable to drilling or workover operations and is simple and portable. The hydraulic control system can be fitted with a mechanical anti-lifting device (see the operation manual for the anti-lifting device). Pneumatic liquid type FKQ hydraulic control system This hydraulic control system is fitted with a driller's console or an auxiliary driller's console (optional). Alarm type and non-alarm type driller's console and auxiliary driller's console can be installe
阅读全文

Plug valve

图片
Plug valve is in the united states based on SPM company transfer of technology for digestion, Absorption and the lower torque cock valve series products of technological innovation, the body all adopt high quality strength steel alloy forging and become. Specification are 1", 2", 3", 42 Mpa and 70 Mpa, the rated working pressure of 105 Mpa and 105 Mpa the connection model can be used by the union connection, also can use the internal and external thread (LP\TBG)connection. All kinds of series foreign products. Repair kits are interchangeable SPM similar products with the United States. Can provide the normal temperature, low temperature and sulfurous gas under the conditions of use of cock and repair kits. Design feature of High Pressure Plug Valve Body of preventive maintenance an no need to be removed from the pipeline, no special tools required for removal, which ca n realize the online maintenance; Special plating technology on cock, make excellent abrasion
阅读全文