P series Mud Pump

Design Features of P series Mud Pump


  • P series mud pumps are manufactured by SCOTON, authorized by NOV. The product is in compliance with NOV technical specification and quality requirements of the Company.
  • It is compact in construction, light in weight, small in area, and high in efficiency. All kinds of drive units can be provided as per different conditions.
  • P series mud pumps run smoothly and can meet the special requirements of customers during shallow & middle-deep drilling operations.
  • There are five models for your reference. The input power is from 800HP (597kW) to 2200HP (1640kW).
  • The fluid end modules of 9p100 mud pumps have greatly improve the performance of triplex mud pumps. In addition the unique design makes it easy to inspect quickly and to repair.

Basic specification of P-Series triplex mud pumps

Model
8-P-80
9-P-100
10-P-130
12-P-160
14-P-220
Height,floor to center of Front inlet suction in.(mm)
10 3/4
(273)
13 1/4
(337)
13 1/4
(337)
16 1/2
(419)
19 7/8
(505)
Height, floor to center of discharge  in.(mm)
351/4
(859)
381/4
(972)
391/4
(997)
451/4
(1149)
491/4
(1251)
Over length over skids in.(mm)
161 5/8
(4105)
1761/4
(4477)
1865/8
(4740)
209
(5309)
218 1/4
(5544)
Width over frame in.(mm)
62 9/16
(1589)
67 1/8
(1705)
71 3/8
(1813)
75 5/8
(1997)
91
(2311)
Width over pinion shaft in.(mm)
93 7/8
(2384)
101 1/4
(2572)
107 1/4
(2724)
113 3/4
(2889)
125 3/4
(3194)
Height, floor to top of gear case  in.(mm)
60(1524)
64(1626)
67(1702)
75(1905)
841/4(2139)
Height over fluid cylinders in.(mm)
51 7/8
(1318)
54 7/8
(1394)
55 7/8
(1419)
62 15/16
(1599)
69 1/8
(1756)
Max, input horsepower  HP(kw)
800 (597)
1000(746)
1300(969)
1600(1193)
2200(1640)
Rated Pump speed spm
160
150
140
120
105
Max, fluid cylinder liner bore in.(mm)
6 1/4
(158.8)
6 3/4
(171.5)
6 3/4
(171.5)
7 1/4
(184.2)
9
(228.6)
Stroke in.(mm)
8 1/2(215.9)
9 1/4(235)
10(254)
12(304.8)
14(355.6)
Hydrostatic test pressure of standard fluid cylinders
psi (kg/cm2)
10000
(703)
10000
(703)
10000
(703)
10000
(703)
11250
(791)
Ratio of gears
2.463
2.658
2.853
3.439
3.969
Suction connection, ASA-150lb .R.J.
flange in.
8
8
8
10
10
Discharge connection cross w/API-5000-lb.R.J. flange in.
4
5
5
6
6
Valve pot, API number
MOD.6
MOD.6
MOD.6
MOD.7
MOD.8
Weight-complete, less sheave lbs.                                                        
(kg)
26970
(12235)
33200
(15060)
42550
(19300)
54700
(24810)
82000
(37195)


评论

发表评论

此博客中的热门博文

PDC bit

图片
The full name of the PDC bit is Polycrystalline Diamond Compact bit. PDC bit is a drilling tool commonly used in the geological drilling industry. In fact, its evolution is evolved from the diamond. According to the bit body material classification ⒈ Matrix Body PDC Drill Bit Matrix body PDC bit is a t ype of cutting drill that welds a diamond composite sheet by brazing on the drill body. The carcass bit is sintered with tungsten carbide powder and brazed to the tungsten carbide carcass with artificial polycrystalline diamond composite sheet and cut with natural diamond. ⒉ Steel Body PDC Bit Steel body PDC bit is nickel, chromium, molybdenum alloy machining forming. After the heat treatment in the drill body drilling, the artificial polycrystalline diamond composite sheet into the (tight fit) drill body, with cylindrical tungsten carbide path.
阅读全文

Dissolvable Frac Ball

图片
Dissolvable Frac Ball DESCRIPTION SCOTON's SDF Dissolvable Frac Ball is a metallic dissolvable frac ball designed to provide zone-successive isolation for frac plugs, frac sleeves and static isolation subs. Its high shear strength allows it to maintain integrity and isolation during high pressure fracturing and the Wraith Frac Ball dissolves at controllable and predictable rates to allow production from all treated zones. Cast and machined from an aluminum base, the SDF Frac Ball's high shear strength is excellently suited to High Pressure, High Temperature and Horizontal/Extended Reach applications. The SDF Frac Ball only requires exposure to water at temperatures above 100° F to begin dissolving, however faster dissolve rates may be achieved. SCOTON has developed an empirically proven equation which accurately and reliably predicts the dissolve rate of SDF Frac Ball in water based on its (compound and physical) properties and specific bottom hole temperatu...
阅读全文

Koomey Unit (BOP Control System)

图片
Koomey unit ( BOP control system ) for surface BOP stacks is very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. The hydraulic control system manufactured by SCOTON can be divided into 3 types: Directly manually operated FK series hydraulic control system The hydraulic control system not fitted with a driller's console is applicable to drilling or workover operations and is simple and portable. The hydraulic control system can be fitted with a mechanical anti-lifting device (see the operation manual for the anti-lifting device). Pneumatic liquid type FKQ hydraulic control system This hydraulic control system is fitted with a driller's console or an auxiliary driller's console (optional). Alarm type and non-alarm type driller's console and auxiliary driller's console can be installe...
阅读全文