Iron Roughneck
The iron roughneck for sale consists of the main forceps and the knobs, which are able to buckle / shackle the string diameter range from 2-7 / 8 "to 10" and the full operation of the buckle / shackle is integrated in one Pneumatic control box, press the button once to complete all operations, while the pneumatic control box can be installed in a safe place to achieve remote control.
The Miniscope which is used to position the iron roughneck, is a compact, lightweight device that is driven by a hydraulic cylinder to achieve the force in both directions - to stretch and push To promote the iron drill to the wellhead buckle, after the end of the iron drill back to the rest position.
The Miniscope which is used to position the iron roughneck, is a compact, lightweight device that is driven by a hydraulic cylinder to achieve the force in both directions - to stretch and push To promote the iron drill to the wellhead buckle, after the end of the iron drill back to the rest position.
T-120 Iron Roughneck
The new T-120 Iron Roughneck from SCOTON produce with maximized reach and takes it to an unprecedented level. Completely retractable, the tool extends just over 5 feet from the pivot, minimizing its footprint and leaving more room on the rig floor. Fully extended, the tool travels a full 12 feet allowing versatile layout configurations. With its trackless design, the new T-120 continues to improve drill floor safety.The innovative torque wrench design has a full 60 degrees of rotation and three-point bite which means
better grip, quicker make-up and less box deformation on the connection by applying more accurate make-up torque. Combined with a high-torque spinning wrench design the T-120 is equipped to handle today's high-performance drill pipe connections.
Iron roughneck T-120 specification
Weight: ST-120 Assembly
19,800 lbs (8981 kg) (installed weight)
|
Connection Height
33.10" to 75.10" (841 mm to 1,908 mm)
|
Hydraulic Requirements
2,500 psi (172 bar) to 3,000 psi(207 bar)
45 GPM (170 LPM)Min; 65 GPM(245 LPM) Max
|
Horizontal Travel
12 ft (3.66 m)
|
Tubular Range OD
(88.9 mm to254 mm)
|
TW Vertical Travel
42" (1 ,067 mm)
|
Spin Speed
80 RPM (nominal on 5" OD)
|
SW Vertical Travel
42" (1 ,067 mm)
|
Spin Torque
3,000 Ib-ft (4,067 Nm)
|
System Control
Hydraulic-Over-Hydraulic; optional
Electric-Over-Hydraulic (Remote-Auto)
|
Maximum Make-Up Torque
100,000 lb-ft (135,600 Nm)
|
Operator Controls
Locally-Mounted to Tool; optional
Remote-Auto
|
Maximum Break-Out Torque
120,000 lb-ft (162,700 N-m)
|
Optional Features
Bit Breaking, Automatic Remote Control
from Driller's Cabin, Wireless Remote
Control, Casing Module/Hanger
|
评论
发表评论