IBOP For Top Drive

IBOP for top drive can be divided into Upper IBOP and Lower IBOP, they are control valves which are used with the top drive system. Usually the two valves connected to the top drive drilling device. The inside BOP adopts high reliable metal seal. So it can bear high pressure upward and downward. The working pressure can be achieved 10000 psi or 15000 psi. When well kick occurring, the upper IBOP can be closed by remote controlled, but the lower IBOP will be closed manually. Actuator for top drive is a subsidiary body which controls open and close of Upper IBOP. It works with other accessories of the rig, so that control opening and closing of Upper IBOP on any height of derrick driller console. Both the valve body cavity and accessories have special anti-corrosive processing, so that prolong the working life.

Specification of IBOP For Top Drive

Model
OD
mm(inch)
ID
mm(inch)
OAL
mm(inch)
Conn.
STJ03M
187(7 23/64)
78(3 5/64)
572(22 33/64)
6 5/8REG BOX &BOX
STJ03J
187(7 23/64)
78(3 5/64)
523(20 19/32)
6 5/8REG BOX &PIN
DQFP187-3C
187(7 23/64)
76.2(3)
572(22 33/64)
6 5/8REG BOX &BOX
DQFP187-4
187(7 23/64)
76.2(3)
523(20 19/32)
6 5/8REG BOX &PIN
DQFP187-9
187(7 23/64)
78 (3 5/64)
523(20 19/32)
6 5/8REG BOX &PIN
DQFP187-10
187(7 23/64)
78 (3 5/64)
572(22 33/64)
6 5/8REG BOX &PIN
DQFP190-1
190(7 31/64)
76.2(3)
547(21 17/32)
6 5/8REG BOX &PIN
DQFP196-1
195.8(7 45/64)
78 (3 5/64)
572(22 33/64)
6 5/8REG BOX &BOX
DQFP196-2
195.8(7 45/64)
78 (3 5/64)
523(20 19/32)
6 5/8REG BOX &PIN
DQFP197-5C
197(7 3/4)
76.2(3)
572(22 33/64)
6 5/8REG BOX &BOX
DQFP197-6B
197(7 3/4)
76.2(3)
536(21 7/64)
6 5/8REG BOX &PIN
DQFP197-3
197(7 3/4)
78 (3 5/64)
584(23)
6 5/8REG BOX &PIN
DQFP197-4
197(7 3/4)
78 (3 5/64)
512(20 5/32)
6 5/8REG BOX &PIN
DQFP200-2
200(7 7/8)
76.2(3)
547(21 11/32)
6 5/8REG BOX &PIN
DQFP216-1
216(8 1/2)
78 (3 5/64)
600(23 5/8)
6 5/8REG BOX &PIN
DQFP216-2
216(8 1/2)
78 (3 5/64)
533(20 63/64)
6 5/8REG BOX &PIN
DQFP216-4
216(8 1/2)
76.2(3)
603(23 47/64)
6 5/8REG BOX &PIN
SDX254-3
254(10)
105(4 9/64)
596(23 15/32)
6 5/8REG BOX &PIN


评论

发表评论

此博客中的热门博文

Koomey Unit (BOP Control System)

图片
Koomey unit ( BOP control system ) for surface BOP stacks is very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. The hydraulic control system manufactured by SCOTON can be divided into 3 types: Directly manually operated FK series hydraulic control system The hydraulic control system not fitted with a driller's console is applicable to drilling or workover operations and is simple and portable. The hydraulic control system can be fitted with a mechanical anti-lifting device (see the operation manual for the anti-lifting device). Pneumatic liquid type FKQ hydraulic control system This hydraulic control system is fitted with a driller's console or an auxiliary driller's console (optional). Alarm type and non-alarm type driller's console and auxiliary driller's console can be installe...
阅读全文

Top drive Floating Cushion Sub

图片
Top drive floating cushion sub an important tool in drilling operation. It is suit to the drilling process in oil, gas and geological exploration. Mainly used for top drive drilling operation. It can increase the working life of bearing and gear in top drive rotary box. Specification of Top drive Floating Cushion Sub OD mm(inch) Upper Conn. Lower Conn. Lifting Force(T) Torque (KN • m) Stroke Mm(inch) OAL mm(inch) DQFC381(15) 6 5/8REG NC50 150 50 76(3) 798(30 13/32)
阅读全文

Wireline BOP

图片
The wireline BOP is used for sealing the wellhead to prevent well blowout accidents is logging operation when there are accidents and there are cables in the well. The  wireline BOP has simple structure, convenient application and maintenance, small volume, light weight, high pressure bearing, hydraulic remote control and simple and reliable operation. The BOP is mainly composed of main casing, and ram assembly piston, hydraulic cylinder, lead screw, end cap, hand wheel and other spare parts, which are moving in the main casing in opposite direction. When the well needs to be sealed, the hydraulic control and grease injection pressure control system is pressurized to push the piston, thereby leading the two ram bodies to move towards the center of the well bore, and well sealing can be achieved through the associative action of the front rubber sealing element and the top sealing rubber. The ram can be locked on the shut-in position through clockwise rotating the locking hand...
阅读全文