Casing Running Tool

Mechanical Casing Running Tool (Internal)

Casing running tool is a new technology for running casing. We developed the more safe and effi cient internal casing running tool to break the limitation of normal running casing operation. This technology could develop all the advantages of top drive drilling, make the casing string rotating, lift and circulating the mud simultaneously, insure the casing could be running to the well bottom normally, improve the success rate, safety and effi ciency of casing running observably. It has a wide introduction value to the oil field.

Specification of Casing Running Tool (Internal)

Model
Casing Running
Range (inch)
ID mm
(inch)
Conn.
Sealing
load MPa
Max tensile
load K-N
Max. Working
torque (KN.m)
OAL
Mm(inch)
MCRT 168
6- 5/8,7-5/8,8-5/8
50.8(2)
6-5/8REG
35
3200
26
2800
(110 1/2)
MCRT 244
9-5/8,10-3/4,11-3/4
50.8(2)
6-5/8REG
35
4500
50
2935
(115 1/2)

Casing Running Tool (External)

Casing running tool has a new technology for running casing. For the limitation of normal running casing operation, we researched and developed this casing running tool which has advantages of safety and high-efficiency. It clamps on the coupling’s outside by internal teeth of slip. Making the casing string rotating and circulating the drilling fl uid in the same time. It can insure the casings running to the well bottom normally. It improved the success rate, safety and efficiency in running to the well bottom normally. It improved the success rate, safety and effficiency in runing casings operation. It only need four kinds of slip head, eight kinds of slip teeth to running all sizes casings. Our casing running tools are well used in Liaohe and other domestic oilfield.

Specification of Casing Running Tool (External)

Model
Casing Running Range(inch)
ID mm(inch)
OAL mm(inch)
SECRT140
4.5~5.5
25.4(1)
2050(80 23/32)


评论

发表评论

此博客中的热门博文

Koomey Unit (BOP Control System)

图片
Koomey unit ( BOP control system ) for surface BOP stacks is very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. The hydraulic control system manufactured by SCOTON can be divided into 3 types: Directly manually operated FK series hydraulic control system The hydraulic control system not fitted with a driller's console is applicable to drilling or workover operations and is simple and portable. The hydraulic control system can be fitted with a mechanical anti-lifting device (see the operation manual for the anti-lifting device). Pneumatic liquid type FKQ hydraulic control system This hydraulic control system is fitted with a driller's console or an auxiliary driller's console (optional). Alarm type and non-alarm type driller's console and auxiliary driller's console can be installe
阅读全文

Top drive Floating Cushion Sub

图片
Top drive floating cushion sub an important tool in drilling operation. It is suit to the drilling process in oil, gas and geological exploration. Mainly used for top drive drilling operation. It can increase the working life of bearing and gear in top drive rotary box. Specification of Top drive Floating Cushion Sub OD mm(inch) Upper Conn. Lower Conn. Lifting Force(T) Torque (KN • m) Stroke Mm(inch) OAL mm(inch) DQFC381(15) 6 5/8REG NC50 150 50 76(3) 798(30 13/32)
阅读全文

Wireline BOP

图片
The wireline BOP is used for sealing the wellhead to prevent well blowout accidents is logging operation when there are accidents and there are cables in the well. The  wireline BOP has simple structure, convenient application and maintenance, small volume, light weight, high pressure bearing, hydraulic remote control and simple and reliable operation. The BOP is mainly composed of main casing, and ram assembly piston, hydraulic cylinder, lead screw, end cap, hand wheel and other spare parts, which are moving in the main casing in opposite direction. When the well needs to be sealed, the hydraulic control and grease injection pressure control system is pressurized to push the piston, thereby leading the two ram bodies to move towards the center of the well bore, and well sealing can be achieved through the associative action of the front rubber sealing element and the top sealing rubber. The ram can be locked on the shut-in position through clockwise rotating the locking hand wheel. W
阅读全文